How to prepare a rubber lining repair for construction?
Sep 13,2022
Carbon steel lining equipment and PH1170 adhesive repair agent products are widely used in industries such as metallurgy, mining, fine chemicals (titanium dioxide, phosphorus chemical, printing and dyeing, etc.), thermal power generation, nuclear power seawater dilution treatment, fertilizer processing, coal chemical industry, etc. So how to prepare a rubber lining repair for construction?
How to prepare a rubber lining repair for construction?
The idea of Gu Ming for storing some carbon steel lining rubber is to stick corrosive rubber plates on the surface or inner surface of the equipment, separating corrosive liquid media or materials from metal equipment, achieving the purpose of corrosion prevention, wear resistance, and protection.
There are more than ten common types of rubber lined equipment for lined meter boxes, including lining pipes, plastic lining boxes, linings, rubber flanges, rubber lined elbows, rubber lined anion and cation beds, and rubber chamber linings (seawater desalination systems).
3. The glue equipment has been used for a long time, and some defects often require maintenance, updates, and repairs. Common collagen defects include: collagen shedding, gel drum, collagen rupture, aging lining, etc.
4. The replacement time of ceramic tile lining equipment is long, the cost is high, and there are safety hazards in local lining. The use of PH1170 adhesive repair agent material to repair local adhesive defects has the advantages of fast repair speed, high safety, simple construction, and low cost.
When conducting local repairs, the original lining should be cleaned. Tilt 45 degrees and remove the original lining tape cut to match the subsequent reactor and lining. Expose the metal layer, polish the metal layer with an angle grinder, expose the golden primary color, and clean with anhydrous ethanol.
6. Apply PH 1170-B-lining treatment agent to the diagonal surface of the lining to improve the connection strength between the lining surface and the lining repair agent.
7. Remove the original short plastic lining and mix the adhesive repair agent at the interface at a 45 degree ratio of 4:1 (A: B ratio). It is recommended to take it in moderation. Long curing time will accelerate the speed. Try to control the quantity and time as much as possible to avoid unnecessary waste. Apply the mixed adhesive repair agent to the surface of the metal layer, repeatedly scraping and squeezing out bubbles. The repaired surface should be flush with the original lining surface. Collagen fully solidifies at room temperature of 25 degrees Celsius, achieving strength and protective effects. Suggest using a baking lamp to heat around 40 cm on the surface of collagen Excellent seawater corrosion resistance with 35% hydrochloric acid medium.
The above is what the editor has organized for you: how to prepare a lining rubber repair for construction? Regarding the related issues, the use of rubber lining repair is still quite extensive. This available technology in construction is relatively good, not wasteful, and very practical. It is basically useless for our household use. We hope it can help you!
PREVIOUS:
Contact Us
E-mail:
hongtuhuanbao@126.com
Phone/WhatsApp:
+86-15954437222
Address:
15th Floor, Chenlong International Building, Fuhua Road, Dongfeng East Street, Gaoxin District, Weifang City, Shandong Province
